Yihua 992DA+ 3-in-1 soldering station

Yihua 992DA+ 720W 4-in-1 Soldering Station with Fume Extractor and Compressor 4-in-1 Fume Extractor Function Sleep soldering flask Hot- flask cooling system Cooling system.Air 3 operating programs Modern electronics inside Power 720W Fast heating Large display Hot-Air temperature control: 100 - 480°C Grotto Temperature Adjustment: 200 - 480°C Blowing power adjustment Compressor 3 work programs - the station has the ability to store 3 work programs for hot air and flask. Depending on the type of work of assembly or disassembly, set the appropriate program. Hot air operation in automatic and manual modes:automatic - after the flask is put down, the system will turn off the heating and cool the flask to a safe temperature;manual - after the flask is put down, the system continues to heat the heating element, it is recommended to switch to automatic mode before finishing the work. Functiontemperature correction depending on external parameters Operation in C/F mode - ability to change the units in which the temperature is displayed. Sleep function for grotto soldering iron - if the flask is not used for a pre-set time (0 - 99 min), the system puts it into sleep mode, i.e. cools it down to 200 °C, which ensures longer life of the device. Grotto flask with a fast-heating heating element that maintains a stable temperature, which is electrostatically safe. Vapor extractor - the station has the ability to extract hazardous vapors. The station is equipped with a microprocessor with a precise PID controller that checks operating parameters and corrects them to preset values. Main features: 4-in-1 station with fume extraction Smooth and precise temperature change Hot Air flask automatically cools down the heating element when the station is turned off Processor control, high operating stability, Extend heating element life, save energy Standby status Stores 3 preset temperatures Blow by compressor Collar made with ESD Safe technology Large number of available blades: more than 30 models High-temperature silicone wire for soldering flasks Very low noise Specification: ️ Power supply voltage: 220 V to 240 V / 50 Hz (mains)️ Power consumption: 720 W️ The station is controlled by a microcontroller for high operating stability️ The device has a PID controller️ Compact design with a large and easy-to-read LCD display️ cooling function Hot Air soldering iron:️ Air blowing is performed by a compressor inside the station️ Air flow rate: up to 28 l/min️ Infinitely adjustable temperature over the entire range️ Hot air temperature control: 100 °C to 480 °C️ Temperature stability: +/-1 °C️ LCD display showing actual blowing power️ Manual/automatic operation mode️ Protection against reaching too high a temperature and informing you with an alarm️ Flask cord length: up to 90 cm Ground soldering iron:️ Adjustable arrowhead temperature: from 200 °C to 480 °C️ Temperature stability: +/- 1 °C️ Cob soldering iron peak power: 72 to 75 W️ Resistance to ground: up to 2 Ω️ Potential to ground: up to 2 mV️ ESD safe system️ Cob cable length: up to 100 cm️ Sleep mode: activated after idle 0-99 minutes️ Hazardous vapor extraction function The station set includes:1️⃣ 4-in-1 Yihua 992DA+ station with power cord2️⃣ 908B arrowhead flask with T-head.B with fume extractor3️⃣ Hot Air flask stand4️⃣ Grotto flask stand including cleaning sponge5️⃣ Gripper for lifting systems6️⃣ Spare fume extractor filterComplete of 5 nozzles:7️⃣ 2.5 mm round8️⃣ 4.4 mm round9️⃣ 6 mm round1️⃣0️⃣ 9 mm round1️⃣1️⃣ 12x12 mm square.