EasyMig 200

Semi-automatic welding machine with a maximum welding current of 200A. Powered by 230V mains. Easy-to-use semi-automatic welding machine with simple synergy. Ideal device for workshop work. Spartus EasyMIG 200 is a lightweight and mobile mig welder with a maximum welding current of 200 A at a cycle of 60%, powered from a single-phase 230V mains. It is used for MIG/MAG, MMA and TIG LIFT welding of steel, stainless steel, aluminum and its alloys and allows brazing of galvanized sheets. Advantages of the device : simple synergy, welding support functions, modern IGBT technology, euro connector, clear and easy-to-use control panel, door-to-door warranty. Synergy Set welding parameters with one knob thanks to synergyThe welder allows you to set welding parameters very easily and quickly with one knob. Choose the thickness of the material to be welded and let the Spartus EasyMIG 200 Migomat choose the welding parameters for you. The machine has a synergy line for 0.6, 0.8, 1.0 wires for CO2 gas shielding and 0.8 and 1.0 for Ar80%+CO2 mixture. The semi-automatic machine also has the ability to work in manual mode, where the user determines the wire feed speed and voltage according to his needs. Support functions 2T/4T This function determines the mode of operation of the switch in the welding torch. Pressing the switch in 2T mode starts the flow of shielding gas and ignites the arc. In this mode, you need to keep the switch pressed and only releasing the button will end the welding. This function works well when making short welds. Pressing the switch in 4T mode starts the gas flow, but the arc will ignite only when you release the button. burn back - a function that prevents the welding wire from sticking to the current tip by extending the wire extra after welding. Inductance adjustment - allows you to optimize the arc characteristics of the flicker machine depending on the thickness of the material to be welded. We can set a soft arc characterized by fewer spatters or a hard arc characterized by better fusion into the material. IGBT EasyMIG 200 is a lightweight and modern source built on the basis of IGBT technology, which translates into a minimum of electromagnetic interference, lower power losses, increased productivity while reducing the consumption of energy drawn from the grid. Euro connector EasyMIG 200 Spartus has a convenient and practical Euro-type socket Connect your favorite welding torch to your EasyMIG 200. Thanks to the Euro type handle socket, you can connect any handle with this type of connection. This also allows you to easily and quickly change the spiral or Teflon cartridge. Control panel The EasyMIG 200 mig welder has a clear and intuitive control panel A. Parameter display, B. Information light : voltage compensation and inductance, C. Display of welding voltage parameters, D. Welding method selection button : MMA, TIG LIFT, MIG, E. 2T/4T selection button, F. Overheat indicator light, G. Function selection button, H. Indicator of device operation, I. Selection/adjustment knob, J. Button for inserting the wire into the holder Door-to-door warranty This is a convenient user solution offered by the Spartus brand. In case of a malfunction, the welder will be collected from you and the repaired one will be delivered back to your hands. All you have to do is report the malfunction.