MIG 180FL inverter welder

MIG 180FL inverter welder The MIG 180FL semi-automatic welder is used for manual welding of steel and non-ferrous metals. It allows welding with MIG/MAG and MMA (shielded electrode) methods. Thanks to the change of polarity, the device allows you to weld with both standard shielded gas wires and self-consuming powdered wires. The welder is made with IGBT inverter technology, which allowed to significantly reduce its weight and dimensions. The MIG 180FL works with D100 (1kg) wire spools. The device is used indoors or covered, not exposed to direct weathering. It is intended mainly for amateur and light casual workshop work. The welder is equipped with an integrated MIG welding chuck, electrode cable and ground cable with a clamp. SPECIFICATION Part number 7812241 EAN code 5903686610981 Welding/cutting methods/other MIG/MAG, MMA DC Supply voltage [V] AC 230 IGBT execution technology Max MMA welding current [A] 160 Max MIG/MAG welding current [A] 180 Duty cycle MMA [%] 60 Duty cycle MIG/MAG [%] 60 No-load voltage [V] 58 Wire feed speed [m/min] 2 - 13 MIG welding voltage [V] 15.6 - 21.2 Max power consumption MMA [kVA} 6.1 Max power consumption MIG/MAG [kVA] 6,1 Max current consumption MMA [A] 23 Max current consumption MIG/MAG [A] 21 Wire spool diameter ø [mm] 100 Roll dimensions [mm] 28×8 (7×7) Main method MIG/MAG Features 2-roll feeder, Gasless welding, Analog control, LED display Mains protection [A] 16 Warranty period for companies [years] 1 Weight [kg] 8.1 Dimensions (L x H x W) [cm] 33 x 15.5 x 25 EQUIPMENT INCLUDED Einhell TW-14 type MIG welding chuck 2 m Electrode cable Ground wire