Synergic inverter welder DIGIMIG 210 LCD DOUBLE PULSE

Synergic inverter welder DIGIMIG 210 LCD DOUBLE PULSE Synergic welding machine with digital control DIGIMIG 210 LCD DOUBLE PULSE is used for manual welding of steel and non-ferrous metals. It can also be used for soldering thin galvanized sheets. It allows welding by MMA (shielded electrode), TIG Lift (with arc ignition by rubbing), and MIG methods. The MIG method can be used in manual and synergistic modes, simplifying its operation. Thanks to the change of polarity, the device allows MIG welding with both standard shielded wires and self-consuming powdered wires. The use of pulse or double pulse makes it possible to achieve better weld quality, high aesthetics with very high productivity. The welder's use of refined synergy settings for carbon steel, stainless steel, and aluminum and copper alloys allows use by those with less experience and hobbyists. During MMA welding, the HOT START, ARC FORCE and VRD off functions can be adjusted. The device has a memory of the last setting, that is, when it is turned off and turned on again, the last set parameters are restored. Thanks to the Fan Stop function that turns off the fan when the welder is under low load, the noise level is significantly reduced. The welder is factory configured for welding aluminum. It also comes with a MIG chuck, ground wire, electrode wire, additional steel roll, steel and Teflon cartridge. SPECIFICATION Part number 7812698 EAN code 5903686617720 Methods of welding/cutting/other soldering, MIG/MAG, MMA DC, TIG Lift (by rubbing) DC Supply voltage [V] AC 230 IGBT manufacturing technology Max MMA welding current [A] 200 Max TIG DC welding current [A] 200 Max MIG/MAG welding current [A] 200 MMA duty cycle [%] 30 TIG duty cycle [%] 30 MIG/MAG duty cycle [%] 30 No-load voltage [V] 64 Wire feed speed [m/min] 2 - 12.8 Feeder approach speed 3 - 6 MIG welding voltage [V] 15.5 - 24 Welding voltage correction -5 - +5 MIG gas flow [s] 0.1-2 MIG pulse frequency [Hz] 1-2.5 MIG pulse width [%] 20-80 Max power consumption MMA [kVA} 8,5 Max power consumption TIG [kVA] 8,5 Max power consumption MIG/MAG [kVA] 8,5 Max current consumption MMA [A] 45 Max current consumption TIG [A] 29 Max current consumption MIG/MAG [A] 39 Wire spool diameter ø [mm] 100, 200 Feeder type 2RA Roll dimensions [mm] 30x22x10 2RA Main method MIG/MAG Functions 2T/4T, Arc Force, Fan Stop, Hot Start, Microcontroller (MCU), Spool Gun option, 2-roll feeder, Dual Pulse, MIG gas flow, Feeder access speed, MIG pulse, Inductance adjustment, Gasless welding, Digital control, Manual settings, Synergic settings, VRD, Electrode selection, LCD display Mains protection [A] 25 Warranty period for companies [years] 1 Weight [kg] 13.3 Dimensions (L x H x W) [cm] 495 x 210 x 330 EQUIPMENT INCLUDED Welding bracket TW-15/3m Electrode cable Ground wire Blue coated steel cartridge 3 m Teflon cartridge black