TIG 320ACDC pulse welding kit with WS-7.5LT cooler and cart pl

TIG 320ACDC pulse welding set with WS-7.5LT cooler and platform cart TIG 320 AC/DC pulse is an inverter welding machine made with IGBT technology. It is used for manual DC and AC welding using the TIG method and DC welding with covered electrode (MMA method). It is widely used in both production and service work. It is designed for indoor and covered work. The welder allows full adjustment and control of all welding parameters of arc and pulse characteristics. It has HF ignition, 2T/4T function and display indicating welding current. The device is characterized by excellent welding properties, recommended especially for professionals. The set includes a liquid-cooled TIG welding holder, a ground cable with a tick clamp, an MMA electrode cable, a welding disc and a hammer. The WS-7.5LT cooler is dedicated to work with the Sherman-profi TIG 320 AC/DC pulse welder and is designed for liquid cooling of TIG welding chucks, but it is possible to use it for other equipment and components requiring closed-circuit cooling. It is recommended to position the cooler under the welding machine. The kit includes a set of mounts that allow such positioning. The construction of the cooler uses components of the proven WRC-300B cooler, the reconstruction and the fluid reservoir have been changed. The use of a heat exchanger built on a copper coil and a stainless steel pump definitely increase the cooling efficiency and prolong the life of the device. The TIG platform cart is a stable and sturdy running platform dedicated to the TIG 320 AC/DC pulse kit and WS-7.5LT cooler. The kit includes a cylinder mounting bracket with a chain, a set of 6 welder-cooler connectors and screws connecting the cooler to the running platform. SPECIFICATION Catalog number 7811748 EAN code 5903686617188 Welding methods/cutting/other MMA DC, TIG HF AC, TIG HF DC Supply voltage [V] AC 3×400 IGBT execution technology Max MMA welding current [A] 270 Max TIG AC welding current [A] 320 Max TIG DC welding current [A] 320 No-load voltage [V] 65 MMA duty cycle [%] 40 TIG duty cycle [%] 40 Current rise time [s] 0 - 10 Initial current [A] 10-320 Base current [A] 5-95 % of welding current Current falling time [s] 0 - 25 Crater current [A] 10-320 Gas pre-flow [s] 0.1 - 1 TIG gas postflow [s] 0 - 15 TIG pulse frequency [Hz] 0.5 - 200 TIG pulse width [%] 10-90 AC frequency [Hz] 40 - 200 AC balance [%] 10-90 Max power consumption MMA [kVA} 9 Max TIG power consumption [kVA] 9 Max MMA current consumption [A] 15,2 Max TIG current consumption [A] 13.3 Main TIG method Functions 2T/4T, Alarm, Electrode cleaning function, Current ramp up, Current ramp down, TIG gas ramp down, Pre gas ramp up, TIG pulse, Analog control, LED display Mains protection [A] 16 Radiator supply voltage [V] AC 230 Pump power [W] 370 Coolant flow rate [l/min] 8 Cooling liquid pressure [MPa] 0.3 Tank capacity [l] 3.5 Carriage load capacity [kg] 70 Max current and main cycle 320 A 40% Warranty period for companies [years] 1 Weight [kg] 64 Dimensions (L x H x W) [cm] 72 x 55 x 99.5 EQUIPMENT INCLUDED Welding clamp T-18/4m Ground wire